ReveD / RD-014BC / SG Bell Crank Set for Bell Crank YD-2

The next-generation steering system, SG Bell Crank set, is finally available!
By mounting the bell crank unit forward (3 degrees), the horizontal angle change of the tie rods during steering operation is minimized and stable cornering characteristics are achieved. In addition, by mounting the ball stud for the tie rod horizontally, Ackerman adjustment with spacers is now possible. There are two types in the lineup, for those who use a bell crank specification machine already, we have prepared a “bell crank specification set” and for those who use a slide rack specification machine a “Slide rack specification set” that includes the top deck and servo mount to convert to the bell crank system. Please try this incredible SG bell crankset that has not only the lighter and faster response advantages of the bell crank but also the benefits of the slide rack. The best of both worlds!

Line-up:

• RD-014BC：SG Bell Crank Set for Bell Crank YD-2
• RD-014SR：SG Bell Crank Set for Slide Rack YD-2

Contents:

• Alu. Bell Crank (1pc each for left and right)
• Alu. Center Link (1pc)
• Alu. Bell Crank Post (2pcs)
• Alu. Bell Crank Base (3.0deg,1pc)
• Alu. King Pin (2pcs)
• Φ5, 0.1mm Shim (2pcs)
• Φ4, 0.1mm Shim (2pcs)
• Assembly Instructions / Parts List (1sheet)

For slide rack version also includes:

• Alu. Bell Crank Bridge Set (1pc)
• Alu. Servo Mount (2pcs)

Click here for assembly instructions/parts list:

【Recommended parts】

Image	Product	Name
	RD-001SG	Alu. SG Front Knuckle for RWD Drift

【スペアパーツ・Spare parts】

Image	Product	Name
	RD-014BL	Alu. Bell Crank（Left）
	RD-014BR	Alu. Bell Crank（Right）
	RD-014CL	Alu. Center Link
	RD-014BB	Alu.Bell Crank Bridge Set
	RD-014BP	Alu. Bell Clank Post（2pcs.）
	RD-014KP	King Pin（2pcs.）
	RD-014B30	Alu. bell Clank Bace（3.0deg）
	RD-04SM	Alu. Servo Mount
	RBB-74-2	Ball Bearing（Φ７×Φ4×2.5mm,2pcs.）
	RBB-85-2	Ball Bearing（Φ8×Φ5×2.5mm,2pcs.）
	RC-A3605	Alu. Spacwes（Φ3×Φ6×0.5mm,8pcs.）
	RC-S40S	Φ4 Shim Set (0.1mm/0.2mm each 10pcs.)
	RC-S50S	Φ5 Shim Set (0.1mm/0.2mm each 10pcs.)